HPS200A Horizontal 5-Axis Profiler (Titans)

HPS200A Horizontal 5-Axis Profiler (Titans)

HPS-200A is “Titans” series that is developed in order to realize improvement of productivity of difficult-to-cut materials such as titanium whose demand increases recently. With an unparalleled strength like Titan who is the Greece mythological character, the machine improves machining efficiency of difficult-to-cut materials that has been hard to improve productivity dramatically.

  • Realizes high efficiency of titanium machining by high rigid large structure and each axis federate.
  • Strong cutting by adopting high-torque built-in motor to spindle head.
  • Adopting large coolant volume that is necessary for titanium machining.

Robust structure Robust structure
A pyramid-shaped column that withstands large cutting force strongly, large saddle adopted for C-axis, and a high-torque motor for A-axis make the machine structure strong that is necessary for titanium machining.
Wide-range rotary axes Wide-range rotary axes
A-axis with ±100 deg. of rotary range and C-axis with continuous rotation permit work with large inclined angle and complex shape machining.
Tilting table Tilting table
During workpiece setup, the tilting table is in the horizontal position for stable setup. During machining, the tilting table is in the upright position for removing a large quantity of chips produced efficiently. In addition, tool damage caused by recutting is eliminated because chips are removed immediately from cutting point.
Titanium machining Titanium machining
The machine is equipped the spindle that provides torque more than 1,000Nm, and supports hard metal cutting of titanium coupled with robust structure.
Titanium machining
It shows the strong machine structure, tilting table, and strong
cutting of titanium.
※ See removing massive chip production of titanium.

  HPS200A (Titans)
Working mounting surface of table(mm) 3,860.8×2,082.8
Distance from work mounting surface of table to spindle end(mm) 1,270
Permissible mass of workpiece(kg) 10,000
Column longitudinal travels(mm) 3,860.8
Spindlehead vertical travels(mm) 3,048
Table transverse travels(mm) 1,270
Spindlehead tilt(deg.) ±100
Spindlehead rotation(deg.) Continuous rotation
Spindle speed range(min-1 20~3,600
Spindle drive motor(kW) VAC 45/37

※Specifications are subject to change without notice.

Page Top