TMS Traverse Type Machining Center

TMS Traverse Type Machining Center

High-efficient machine most suitable for the machining of large workpieces.

Rationalization of hole drilled and milling work were realized greatly.
The image of important figure structure changes.

  • Stroke can be easily extended by means of X-axis driving double pinon/rack.(Max25m)
  • Facilitating large-sized workpiece setup and connecting machining is facilitated by means of an automatic centering function/automatic work coordinate rotation centering function.
  • High speed drilling of large and long workpiece and high efficiency production of bearing surface is achieved by improving the rigidity of the open-side system.

Stroke extend Stroke extend
It is adopted the double pinon/rack system as an X-axis driving. It is possible to extend the stroke united 
with work size. (Max 25m)
Open-side system Open-side system
An open side system is adopted and the twice as many processing range as this can be secured by reversing a wide work to a width direction.
Moreover, a large-sized work with difficult treatment can also ease a burden by the arrangement from an open side at the time of a plan.

  TMS25V(M) TMS30V(M) TMS35V(M) TMS40V
Distance from lower face of bed to
spindle end(mm)
2,880 2,880 2,880 4,170
Column travel(mm) 6,000 6,000 6,000 6,000
Spindle head travel(mm) 2,500 3,000 3,500 4,000
Spindle vertical travel(mm) 400 400 400 600
Arm vertical travel(mm) 1,450 1,450 1,450 2,500
Spindle speed(min-1 30~3,000 30~3,000 30~3,000 15~3,000
Spindle motor(kW) VAC 22 VAC 22 VAC 22 VAC 30
Tool storage capacity(pcs) 24 24 24 24

(M)are 5 face machine’s specifications。

※ Specifications are subject to change without notice.

Page Top