FMS

FMS which can adapt itself to the various fields is proposed to from mechanical parts a mold, an airplane and all kinds’ part exclusive use because I’ll help you with substantial improvement of the productivity, labor-saving realization and the nonattended operation which ranges long by SNK.
Or, I also equip with FMS and contribute to productivity improvement of productive facilities in the company.

FMS for machining medium-sized machinary parts  CAMOS-Ⅱ MP

The FMS system based on highly precise 5-face machining centers has realized substantial reduction of work set-ups and achieved high accuracy and high operation rate.

FMS for machining medium-sized machinary parts  CAMOS-Ⅱ MP image

 
  FMS CAMOS II-MP operating 600Hrs/Month  
  ・EMC-3F multi-centers (4 units) ・Trabsfer system ・Centralized computer system  
  ・Setup station ・Pallet stocker    
         

FMS for machining dies and molds

FMS for machining dies and molds image

 
  ・DC-4AS high-speed milling machines (3 units) ・Transfer system ・Manipulator  
  ・HF-4M multi-center with a swivelling head (1 unit) ・Setup station ・System control  
  ・Pallet stocker ・MM2500(3-D Coordinate Measuring Machine) (1 unit)  
         

Automated machining systems for small mechanical parts

Automatic machining cell system combines versatility with remarkable efficiency.

Automated machining systems for small mechanical parts image

FMS for machining airframe components

Full-scale FMS provides 5-axis machining of curved surfaces.

Full-scale FMS provides 5-axis machining of curved surfaces image

 
  ・3-D Coordinate Measuring Machine ・Tool management system ・Transfer system  
  ・Setting station ・Automated storage system ・Centralized system  
  ・FSP-100V 5-Axis (5 unit)    
         

Segment machining system

Segment machining system image

 
  ・End-face milling machine (1 unit) ・End-face grooving / drilling machine (opposed head type) (1 unit)  
  ・Side-face milling machine (opposed head type) (1 unit) ・Side-face grooving machine (opposed head type) (1 unit)  
  ・Ingate cutting / side-face drilling machine (opposed head type) (1 unit) ・Setting station (1 unit)  
  ・Removal station (1 unit) ・Machine-to-machine pallettransfer line (1 set)  
  ・Transport vehicle station (1 set) ・Pallet stocker (4 unit)  
  ・Jig removal station (1 unit) ・System controller (1 unit)  
       

Revolving frame machining cell

The revolving frame machining cell is a machining cell system that performs efficient, unattended and continuous machining of revolving frames for mini power shovels.
Use of jig plates enables the machining of workpieces of different sizes.
The cell is capable of environmentally friendly semi-dry machining.

Revolving frame machining cell image

 
  ・Setting station (1 set) ・Stocker (1 set) ・Transfer system (1 set)  
  ・Cell system controller (1 set)    
         

Automatic rail machining system

This automatic rail machining system is a flexible machining system (FMS) capable of performing all machining operations for stock rails, guard rails, switch rails and expansion rails in single setups.

Automatic rail machining system image

 
  ・Rail stocker ・Fully automated rail-clamping jigs ・Automatic loader for rail transportation  
  ・A gantry type machine specially designed for rail machining    
         
Page Top