HLM High-Speed Light Milling Machine

HLM High-Speed Light Milling Machine

Continuous 5 axis and high speed spindle machine suitable for various fields, aerospace industry, automobile-related industry, sports-related industry and construction industry.

  • Gantry configuration for ease of work.
  • Equipped with a Gearless 5 axis milling head which it enables to cut without backlash.
  • Adopted gas balancer instead of an oil unit.

主軸頭 Spindle head
Equipped with a grease lubricated high speed spindle, with an output of 11kw (continuous)/15,000min-1 . Spindle bearing system designed to protect from oil
drops.
切粉対策 Provision for chips
Flying chips and dust at cutting are shut out by splash cover with roof and dust-collecting hood (Optional)

  HLM2000 HLM3000 HLM4000
Effective distance between columns (mm) 3,000 4,000 5,000
Distance from floor plate top to spindle end
(when floor plate and floor is the same)(mm)
1,000 / 1,300 1,000 / 1,300 1,000 / 1,300
Distance from floor plate top to A axis rotation center (mm) 1,240 / 1,540 1,240 / 1,540 1,240 / 1,540
Spindle head, longitudinal(mm) 4,000 / 6,000 / 8,000 4,000 / 6,000 / 8,000 4,000 / 6,000 / 8,000
Spindle head, transverse (mm) 2,000 3,000 4,000
Ram, vertical(mm) 1,000 1,000 1,000
Spindle head, tilt (deg.) ±100 ±100 ±100
Spindle head rotation(deg.) ±270 ±270 ±270
Spindle speed (min-1 3,000~15,000 3,000~15,000 3,000~15,000
Spindle drive motor (kW) VAC 15/11 VAC 15/11 VAC 15/11

※Specifications are subject to change without notice.

Page Top